The SimPure ROULP-3012-400-T1 has been verified and tested by SGS and meets the NSF/ANSI 58 Standard. UV+RO Tankless Reverse Osmosis System. This ensures its exceptional quality and performance.
It can convert your tap water into pure and healthy drinking water by removing 99.99% of the 1,000+ contaminants including viruses, bacteria, chemicals (PFOA/PFOS, Pharmaceuticals), heavy metals (Lead, Arsenicetc), chlorine, TDS (fluoride, nitrates/nitrites) and etc. SimPure high-efficiency RO Filter removes contaminants 0.0001 microns or greater in diamete.
This tankless ro water filter system is equipped with SimPure special reverse osmosis membrane, so the TDS Removal Rate can reach up to 95%+. If the TDS of your tap water is between 0-200ppm, the filtered water will be close to 0ppm. If the TDS is between 200-500ppm, the filtered water will be below 25ppm. Use no chemicals and emits absolutely no by-products, effectively destroying 99.999% of microorganisms, bacteria, germs more thorough sterilization from your water.SimPure UV purification system combined with 4-Larger filters RO Filtration System, can make water purification to another level. 400 GPD & 1.5:1 Pure to Drain Ratio. T1-400UV offers faster flow-400 gallons per day with lower waste 1.5:1 pure to drain ratio, which will save your water bills.
Great for household and light commercial in Restaurants, Salons, Labs, and Offices all benefit in their ways from high-quality RO water. RO System With Booster Pump. With a booster pump, you will never worry for low water pressure, it will easily booster your water pressure to the optimal level and run the RO system more efficiently, producing the purified water fater. Meanwhile, saving at least 50% more waste water than a traditional RO system without a booster pump.
SimPure T1-400UV is a new generation RO water filtration system under sink. It adopts tankless design, which can save up to 70% of your under sink space.
It will be much easier and more convenient to install, ready to use within 30 minutes. Also you can get rid of the water tank, avoid the secondary pollution. It supplies you 24/7 fast and stable flow purified water, never need to wait. The pre-membrane pressure gauge can remind you when to replace the filters, which is more scientific than timing. The value is normal for 100PSI. If value exceed 130PSI, the RO filter need to be replaced. If it lower than 100PSI, the PP and CTO filter need to be replaced. You can refer to the data of pressure gauge to judge when to replace and which filters need to replace.Care your health in a more precise way. Seattle, WA USA, SimPure dedicated in providing world-class quality of water filtration solutions.
Please contact our trained water specialists. And is available to answer any questions during the life of the product. SimPure is specializing in creating ergonomically designed, efficient household filtration, and purification systems. SimPure technology focuses on water purification products for more than 15 years, we are trustworthy and reliable.Full Set of RO System. PE Tubing (White, Blue, Red). Faucet adaptor ¼ tube QC. SimPure believe that bright futures for humanity begin with clean water, and we have made it our mission to provide that.
In short 10 years, successfully among the world leaders in membrane application, and proudly passed ISO9001, CE, FDA, and NSF certification early in 2013. SimPure believes in a minimalist lifestyle, and we are committed to making it easy for you to get a clean, comfortable, and safe home without saddling your family with complicated technology. Maximum Flow Rate : 400 GPD (400 Gallons Per Day). Pure to Drain Ratio : 1.5:1. Power Requirements : 100-240 Volts, 60Hz, AC. Feed Water Type : Tap water or Well water. Filtration Precision : 0.0001 microns.UV Light : UV wavelength: 270280nm; UV dose: 8600uJ/cm². Dimensions : 15.9" x 15.6" x 5.2.
8-Stage RO+UV Water Filtration System. Premium 4 large filters remove up to 99.99% of 1000+ contaminants, like, Odor, Lead, Fluoride, Nitrates, heavy metals. The equipped UV sterilizer, effectively reduce up to 99.999% of harmful microorganisms in your water. Supplying you spring-fresh and healthy water. Advanced 400GPD membrane offering an exceptional 1.5:1 pure to drain ratio.
With a fast and stable water flow rate, this RO system fills a 200ml cup with water in 10 seconds. TDS Can Reduce To Zero. 200ppm, it can reduce the TDS to ZERO.
When tap water TDS is between 200500ppm, it can reduce the TDS very close to ZERO. T1-400UV RO System adopts tankless design, which saves 70% space of undersink and produces pure water on demand without waiting, also eliminates the need for the water storage tank, which avoiding secondary pollution and easier to install. The booster pump will increase water pressure inlet the RO filter, saving at least 50% waste water. With a booster pump, the RO system will produce the purified water with a faster speed than traditional RO system without booster pump. Q: The system cannot be powered on after you insert the power plug.A: Check the power under the sink, as this occurs primarily when the power under the sink is powered off. Also check the connection betwen the power plug and the power outlet to ensure that the system has been correctly plugged into the power outlet.
Q: No output water from the faucet. A1: Water supply is off:Turn on the feed water adapter or water supply valve. A2: Incorrect filter installation:Reinstall the filter and make sure each filter cartridge is installed in the correct location. A3: A tubing is crimped:Check all the tubing and remove any crimps. Q: Low water flow at the faucet.
A1: A tubing is crimped or there is a leak from the tubing connection:Check to ensure that all tubing is installed correctly and completely. A2: Low water temperature:Be sure to use it at a temperature of 40-100? A3: Low water pressure:Confirm the water pressure is between 15-60 psi. A4: The filter cartridge has been clogged: If you are using well water as the source, please ensure that the feed water has been through a pre-filtration system. Otherwise, large particles in the well water will easily clog the filter and shorten the filter life. Q: Why does black water come out during flushing? A: It's normal that black water comes out when flushing.The purpose is to remove carbon powder remaining on the surface of filter materials. You can normally use it after flushing for 5 minutes. Q: Filtered water from the faucet tastes like tap water. A1: Incorrect tubing installation:Make sure the drain tubing is not connected to the faucet.
A2: The filter is expired: Replace the T33 filter or RO filter cartridge. Q: What should I do if the system is leaking. A: Check all the joints, filttings, and tubing connections to locate the leakage.
Make sure the cartridges are well installed. Turn off shut off valve, then solve it.