SimPure 10" x 4.5" 2 Stage Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Relief Valve- GAC Filter, Carbon Block, Sediment Filter Cartridges - Remove Silt, Sand, Rust, Dirt, Chlorine, Taste & Odors, Iron, Lead - Whole Home/Pool/Well/Farm Water Filters Portable Steal Frame - with Spin Down Sediment Pre-filter (40micron / 200micron). The SimPure DB10C is a 2 Stage Whole House Filtration System(PP Sediment + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy.
We use 2x2 O-Ring+brass fittings, it effectively reduces the risk of leaks and drips. Each filter bottle features a dual O-ring design for a tighter seal at the connection points. Additionally, we've added a rubber gasket at the top of the filter cartridge.What's more, we've upgraded the material at the connection points, replacing plastic with brass fittings. Clear Housing is convenient to indicate and track of your filter life.
Enjoy better water from every tap and every appliance in the whole house. With our instruction you can use and install 2-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Clear Housing help you to know which filter and when you need to change. Remove the filters easily by the Pressure Release Buttons.
The black cap has 1 female National Pipe Thread Taper (NPT) threaded input and output connections, DOUBLE O-ring to ensure watertight seal. 5 replaceable whole house water filters can provide up to a full year of clean water(up to 100, 000 gallons) for a family of four. 1-inch inlet and outlet ports allow fast water flow with less pressure loss. Fine PP sediment filter and premium quality CTO filter not only bring clean and fresh water to every faucet in your house, but also help prolong the lives of your water-using appliances and protect plumbing from sediment and scale buildup.
This SimPure 2-stage water filtration system connects directly to your home's main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure 2-Stage Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. Our 2-stage filter housing consists of two NSF standard transparent, they are made of reinforced polypropylene for strength and resistance to chemicals.
Furthermore, we've improved the quality of the filter bottles by increasing their thickness and durability. You can confidently use it as a pre-filter for municipal or well water sources. The lifespan of carbon filter is 3-6 months, while the sediment filter can last for 6-12 months. The specific duration depends on your water quality.
With a 5 micron filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F(5-38? Stage 1: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles, etc.
Remove chlorine, chloramine, VOCs, bad taste and odor, etc. Double O-Ring ensure watertight seal.
Three accessible pressure release buttons for easy filter change. Big Clear Housing let you know when to replace the filters. The pressure relief Valve: Let you replace the filter cartridges easily Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow.
Spin Down Sediment Pre-filter: - With SimPure Whole House Spin Down Sediment Pre-filter, you can have peace of mind that it can purify the water coming into your home. As the filter can keep the particles out of the pipes and plumbing fixtures, you don't also need to spend on heavy repairs and parts replacements. It means less maintenance on your part.
And it can also provide positive protection for the downstream pipeline, water purifier, water heater, wall hung gas boiler, wash machine, shower, and other terminal water equipment. This filter system works with Whole-house Water Filtration Systems, Undersink Water Filtration Systems, RO Systems. Including with SimPure DB10/DB20/DB1025, Culligan(WH-HD200-C, HD-950A, HF-360A), Pen-tek 10 BB filter housings, APEC HBB-10, DuPont WFPF13003B, GE GXWH20S, etc.
The Whole House Water Filter is supplied with 1" Male NPT, 3/4" Female NPT and 3/4 Male NPT. It is suitable for ANY THREADED CONNECTOR with 1" Female NPT or 3/4" Male NPT or 3/4 Female NPT. M filter element for free. M filter will capture most particulates, it's best suited for use on Municipal (tap) or City water. If using it on Well, Lake feedwater, you can replace it with the 200? Otherwise it may require more frequent flushing to remove the build-up of particulates due to the fine filter mesh used. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 10 4.5 Inch. Filter Life (Months): 6-12 Month. Flow Rate (GPM): 15 GPM.Inlet/outlet Connection: 1 female NPT thread. Pressure Range: 25 - 90 psi. DB10C Water Filter System with all accessories.
2x Installed Filters (10"x4.5" PP sediment+CTO filters). DC5P Spin Down Pre-Filter System Set. Q:Leaks between filter head and filter bowl of housing. A1: Tap water pressure is too high; make sure it is below 90psi (620kpa).
If too high, fit a pressure regulator. The O-ring may not be in place. A2: O-ring with silicone grease.
Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Q: Leaks on inlet/outlet connections.
A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button.A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time. A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element.
Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge. A1: Check the filter cartridge has not been installed incorrectly. Make sure the plastic wrapper around the filter has been removed.
A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage.
To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean.
SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.