In solution, salts separate into positively-charged cations and negatively-charged anions. It replaces sodium, calcium, magnesium and other cations with hydrogen ions (H). For aquariums, laboratory use, window cleaning and car washing.
DI mixed Bed Resin Water filter - Deionization water filter. TDS meter is required to measure the life of the resin. DI filter (Mix Bed Resin) named as de-ionization stage.Demineralization Resin used to produce 99.99% pure water by simply attaching this convenient deionization filter with RO unit. Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.
Simply DI filter removes remaining of dissolved solids after RO system. Following these precautions, there should be little or no concern regarding the shelf life of the resins being stored.
Before any resin stored for prolonged periods of time is placed into service, it is always considered good practice to soak the resin in saltwater for a few hours. Generally recommended Rules of Thumb are that un-regenerated resins be used within five years, regenerated resins used within one year, and low TOC grade resins within a month or two. This item is in the category "Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters".water" and is located in this country: CA. This item can be shipped to Canada.